High performance force gauges are a good choice when highly accurate measurements are required and/or special features or high sample rates are needed. All of the gauges in this class will measure compression, tension, compression peak, tension peak, average over time of force thresholds, store data, access features via menu system, invert display function for easy reading in various orientations, set point alarms, and electronic data output. These gauges may also perform statistical analysis, have a programmable arithmatic operator, back lit displays, programmable peak sampling rates, as well as key lock out and password features.
Some of these gauges will include software for plotting data output and storing data in a table. There is a wide range of selectable units and these gauges include rechargeable batteries and a plug in charger.

• Series 7 Force Gauges
  • Ultra high performance
  • Tension and compression measurement applications, up to 500 lbF (2500 N).
  • USB, RS-232, Mitutoyo, and analog outputs
• Series 5 Force Gauges
  • Capacities: from 0.12 lb to 1000 lb (0.5 N to 5000 N)
  • USB data port
  • RS-232 data port
• Series 5i Universal Force Gauge (Plug and Test Sensors Only)
  • Force capacities: from 0.25 lb to 1000 lb (1 N to 5000 N)
  • Torque Capacities: from 10 ozFin (7 Ncm) to 5,000 lbin (550 Nm)
  • USB data port
  • RS-232 data port
• M5-2-COF Coefficient of Friction (COF) Gauge
  • Capacity: 5x0.001 COF (based on a 200g sled)
  • USB, RS-232, Mitutoyo, and analog outputs
  • Calculates static and kinetic coefficients of friction

• DFS II R-ND Series (Remote Sensors Only)
  • Capacity: from 250g 10,000lbf force. 50in-oz to 200in-lb of torque
  • RS-232 data port
  • USB data port
  • Bluetooth compatibility
• DFS II R Series (Dedicated Remote Load Cell)
  • Capacity: rom 0.5lbf (2.5N) to 1000lbf (5000N)
  • RS-232 data port
  • USB data port
  • Bluetooth compatibility
• DFS II Series
  • Capacity: from 0.5lbf (2.5N) to 500lbf (2500N)
  • RS-232 data port
  • USB data port
  • Bluetooth compatibility

• Advanced Force Gauge (AFG) (Will also support remote sensors)
  • Capacity: from 0.55lbf (2.5N) to 550lbf (2500N)
• Advanced Force Torque Indicator (AFTI) (Remote Sensors Only)
  • Capacity: from 3.5oz to 22,000 lb of force, 13 lb-in to 1300 lb-1n of static torque, and 8oz-in to 111 lb-ft of dynamic torque (5000rpm max)

Intermediate digital force gauges are a good choice when accurate measurements are required. In addition to compression, tension, compression peak, and tension peak measurements, many of the models in this class may have the capability to store data and have pass/fail alarms that can be set. Some may have an averaging function and statistical analysis of force data collected. Gauges in this class may or may not have electronic data output. The displays can be electronically or mechanically inverted, providing easy reading of the display in various orientations. Generally, there is a menu system enabling access to the various gauge functions. There is a wide range of selectable units and these gauges include rechargeable batteries and a plug in charger.

• Series 4 Force Gauges
  • Capacity: from 0.12lb to 500lb
  • USB data port

• DFE II Series
  • Capacity: from 2lbf (10N) to 500lbf (2500N)
  • RS-232 data port
  • USB data port

• FGV-XY Dart 2.0 Series
  • Capacity: from 0.5lb (2.000N) to 200lb (500.0N)
• FGE-X Dart Series
  • Capacity: from 0.5lb (2.000N) to 100lb (500.0N)
• FGV-HXY/FGE HX JAVELIN Series
  • Capacity: from 200 lb (1000N) to 1000lb (2500N)

• Basic Force Gauge (BFG)
  • Capacity: from 2.2lbf (10N) to 550lbf (2500N)

Basic force gauges are an economical choice for force measuring where high accuracy is not required. The accuracy of this class of gauge is acceptable for many force measurements and is limited to measuring compression, tension , compression peak, and tension peak only. Mechanical gauges are included on this class. Units are selectable (except for mechanical gauges), although somewhat limited. The digital gauges may be powered by an internal non rechargeable battery and a plug in battery eliminator or include a rechargeable battery and charger. With the exception of the Mark-10 Series 3 and Mecmesin CFG series, there is no provision for electronic data output. Mechanical gauges are not recommended for pull break tests

• Series MG Force Gauges
  • Capacity: from 0.12lb to 500lb
• Series TT03 Torque Gauges
  • Capacity: from 10 ozin to 100 lbin
• Series TT03C Torque Gauges
  • Capacity: from 12 - 100 lbin
• Series 3 Force Gauges
  • Capacity: from 0.12 lb to 500 lb
• Series 3i Universal Force/ Torque Gauge (remote sersor only)
  • Force capacity: from 250g to 10,000 lb
  • Torque capacity: from 10 ozin to 5000 lbin
• Series 2 Force Gauges
  • Capacity: from 2-100 lbin

• DFX II Series
  • Capacity: from 10lbf (50N) to 200lbf (1000N)
• DG Series (Mechanical)
  • Capacity: from 200lbf to 500lbf or from 1000N to 2500N
• LG Series (Mechanical)
  • Capacity: from 2lbf to 100lbf or from 10N to 500N

• MF Series (Mechanical)
  • Capacity: from 2lb to 100lb

• Compact Force Gauge+ (CFG+)
  • Capacity: from 11lbf (50N) to 110 lbf (500N)
  • RS232 compatible
• FD (Push-Pull), DT (Push only) Series (Mechanical)
  • Capacity: from 1000gf to 30kgf (0.02 lbf to 0.50 lbf)
• DGD (Mechanical)
  • Capacity: from 5gf to 1000gf