Shimpo Stroboscopes

Shimpo
Stroboscopes
	DT-326(LED) SaberStrobe The SaberStrobe is an all new LED stroboscope utilizing super bright light emitting diodes (LED's) in an appealing, durable all metal design. The DT-326's unique LED array provides an accurate and stable strobe light. Long flash life - 5 times longer than traditional xenon flashtubes Wide Flash Range: 60-120,000 flashes per minute, can be applied to meet almost any HIGH-SPEED application Radio Control (Flash Pulse Duration): Adjustable Flash Pulse duration achieves sharper images for critical inspection Phase Shift: Advance or retard flash timing for viewing gear teeth, cutting surfaces, repeats or “drifting” images
	DT-900 TechStrobe The perfect tool for slow motion, or stop action stroboscopic inspection. The Shimpo TechStrobe is the only palm size unit to include a Phase shift feature. Phase shifting allows the TechStrobe operator to advance or retard the flash timing by degrees° of angle, without changing the actual flash rate (FPM) of the TechStrobe. Rechargeable replaceable Battery Tri-pod mount: Hands free holding with (1/4 x 20) mounting for swing arms, camera style tripods Rotary and Push Button Flash Control: Fast Up/Down push button, Fine tune with Rotary encoder Flash Pashe Shift: Precise flash timing control (5 degree increments) push button or rotary control
	DT-315P Designed from the beginning for harsh use. The DT-315P is a rugged, sealed (IP65) Stroboscope suitable for working in areas without AC power. The DT-315P works just like the DT-315A battery operated strobe, however flash tube life is increased, so maintenance of the DT-315P is less. Equipped with Phase shifting in angle of delay (0-359 degrees) and flash time delay, (0-300 mSec) the DT-315P is engineered for checking speed, timing and wear on rotating and reciprocating machinery. IP65 Sealed Construction: Spray and wash down proof; sealed against oil and moisture Phase Shift / Time shift flash control Extra long flash tube life
	DT-311J DT-311J stroboscopes - designed for harsh and wet work areas. Where powerful illumination and rugged speed measuring accuracy are required for the textile industry, the DT-311J will perform where other stroboscopes will not. IP65 Sealed Construction:Spray and wash down proof; sealed against oil and moisture Special Flash control: Observe Injection timing, Injection Pressure, timing of Shedding, Weft running time Division Switch (DIV): Special timing shifts: 1/1, 1/2, 1/3, 1/4 2/4 for different textile conditions
	DT-315A The microprocessor-controlled DT-315A possesses the same great features of the DT-311A with the added convenience of total portability via its own internal power supply with up to one hour of full time, high intensity flash rate. Powered by rechargeable batteries located inside its rugged aluminum housing, the DT-315A also performs as an AC line-powered strobe when plugged into its standard AC adapter/charger unit. Extruded aluminum construction Phase shift (in degrees of delay time):Enables observer to focus on one particular area of rotating and/or reciprocating machinery Repeatable accuracy (± 0.01% of reading) Manual flash controller knob
	DT-311A While the DT-311A stroboscope is extremely easy to operate via its lightweight and compact design, its rugged metal construction provides unequaled reliability in the harshest environments. Highly accurate (± 0.01% of reading) Phase shift (in degrees of delay time) High flash rate (up to 35,000 FPM) Flash timer control Manual flash controller knob
	DT-315AEB the DT-315AEB operates independent of line power via an exterior battery pack that can be carried with a convenient shoulder harness or set down to allow the operator full movement for visual inspection. When fully charged, rechargeable batteries power the strobe for approximately four continuous hours. External battery supply Repeatable accuracy (± 0.01% of reading) Microprocessor-controlled Phase shift (in degrees of delay time) Manual flash controller knob
	DT-721 (120 VAC), DT-725 (Internal Battery), DT-721/725 Kit The DT-721 and DT-725 are packed with many of the same features as Shimpo's famous DT-300 series but are lighter in weight. Constructed of strengthened high impact plastic, these rugged units are exceptionally reliable and withstand the same harsh conditions as more expensive units. Both units are sold separately or as a convenient kit. The DT-721/DT-725 KIT contains a strobe, extra flash bulb, charger and rugged carrying case. Light weight design Phase shift (in degrees of delay time) Slave functions: Can control (or be controlled by) other strobes Unique rotary pulse indicator: Permits strobe to be set at the exact flash rate without drift

Stroboscope Accessories
	SG-300 Strobe Guard-SG-300 A shock absorbing rubber boot that will also help protect against liquid damage. Will fully protected front lens assembly and controls.		Flex Arm-SAS-DT-300 Articulating swing arm, 41" when fully extended. Heavy duty construction with internal springs.1/4" x 20 machine head mounting screw. Includes surface mount swivel bracket for mounting to horizontal surface and mounting screws
	AC Chargers DT-900 DT-315A DT-725 DT-315AEB		Sensors Shimpo offers a full range of sensors, including proximity (DJ2-G, BI2-S12, SE-G, MCS-3109), and retro-reflective (RS220H, MCS-625, MCS-655). Rotary Pulse Generators are also available.
	Extra Bulbs Replacement flash tubes with tube life of approximately 100 million flashes at 1800 FPM (flashes per minute). Replacement flash tubes for all DT-311 / 311A, DT-315 / 315A, DT-314 digital stroboscopes, DT-721 and DT-725 stroboscopes.		Cables-CABLE-311-10FT 10 FT Daisy Chain Cable for DT-311A, DT-315A and DT-314.
	Batteries Replacement Batteries for Shimpo Stroboscopes		Carrying Cases Protective carrying cases for DT-900, DT-725 and DT-300 Series.

Contact Tachometers
	DT-105A(LCD) Shimpo’s microprocessor technology has heralded a superior standard in tachometer accuracy and capabilities for measuring and recording speeds of rotational, linear and surface plus total length. the DT-105A battery-operated tachometers feature the same rugged, high quality components that have made them the benchmark in the industry. These user-friendly, value-packed units feature memory storage; quick adjustment unit’s knob; length functions; retrieval of last, maximum and minimum values; plus each unit comes standard with a free N.I.S.T. certificate. Units are available with an LCD or vibrant red LED display. Can measaure in a number of units Display Range: 0.10 – 25,000RPM with floating decimal Lengthy battery life (25-40hours) Large 5 digit display Large 10 test memory capacity
	107A(LED) Shimpo’s DT-107A offers unprecedented confidence, the DT-107A battery-operated tachometers feature the same rugged, high quality components that have made them the benchmark in the industry. These user-friendly, value-packed units feature memory storage; quick adjustment units knob; length functions; retrieval of last, maximum and minimum values; plus each unit comes standard with a free N.I.S.T. certificate. Units are available with an LCD or vibrant red LED display. Can measure in a number of units Extensive speed range (0.10 - 25,000 RPM) Lengthy battery life (25-40) Large 5 digit display Large 10 test memory capacity
Contact and Non-Contact (Combination Style Tachometers)
	DT-207LRThe laser-enabled DT-207LR has precise RPM measurement up to 20 feet. The Series DT-207LR digital tachometers incorporate laser technology yet retain our hallmark rugged construction and reliable quality components. Units offer incredible value and versatility as they can operate in non-contact and contact applications. These instruments feature a field-upgrade-able contact adapter for linear rate measure, conveniently allowing both non-contact and contact measurements. Incorporating the precise laser technology and user-friendly functions as the DT-207LR tachometer, the DT- 207LR-S12 provides an exceptional accuracy in measuring speed and length via its 12” wheel. The larger wheel rotates more slowly than a standard 6” wheel, enabling reliable and safe registration of high speeds. Accuracy: ±1 rpm: 6 -8,300 rpm, ±2 rpm: 8,300 – 25,000 rpm, ±0.006% of reading ±1 digit (±6 rpm max.) 25,000 – 99,999 rpm Memory system: 13 readings are stored in memory and retained for 5 minutes (last, max., min., and 10 extra measurements) Sophisticated laser beam detection to 20 feet provides operator safety during testing
	DT-205LR The laser-enabled DT-205LR has precise RPM measurement up to 20 feet. The Series DT-205LR digital tachometers incorporate laser technology yet retain our hallmark rugged construction and reliable quality components. Units offer incredible value and versatility as they can operate in non-contact and contact applications. These instruments feature a field-upgrade-able contact adapter for linear rate measure, conveniently allowing both non-contact and contact measurements. Sophisticated laser beam detection Broad speed range (up to 99,999 RPM) Memory system: 13 readings are stored in memory and retained for 5 minutes (last, max., min., and 10 extra measurements) Measuring units: rpm (on contact using adapter, included) for YPM, mPM, FPM, IPM, and Length: YRD, m, FT and IN

Pocket Tachometers
	MT-100 Contact TachometerThe MT-100 provides users with the capabilities of measuring and recording speeds of rotational, linear and surface plus total length. These battery-operated tachometers feature the same rugged, high quality components that have made SHIMPO tachometers the benchmark in the industry. The user-friendly, value-packed units feature memory storage; quick selection unit’s button; length functions; retrieval of last, maximum and minimum values Multiple measuring units Compact; fits in the palm of your hand Memory system: Readings are stored in memory and retained for 5 minutes (last, max., min., and 10 user logged measurements) Detection: Optical coupler, 20 pulses/rev.
	MT-200 Pocket Tachometer These battery-operated tachometers feature the same rugged, high quality components that have made SHIMPO tachometers the benchmark in the industry. The MT-200 provides users with the capabilities of measuring and recording speeds of rotational, linear and surface plus total length in both contact or non-contact modes. The user-friendly, value-packed units feature memory storage; quick selection unit’s button; length functions; retrieval of last, maximum and minimum values Multiple measuring units Compact; fits in the palm of your hand Memory system: Readings are stored in memory and retained for 5 minutes (last, max., min., and 10 user logged measurements) Non-contact measurements up to 23.6” (60 cm) away Detection: laser diode
Panel Mount Tachometers
	DT-5TXRThe DT-5TXR panel meter with optional output Modules is an economical unit for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TXR Panel Meter is extremely versatile with selectable inputs. The DT-5TXR is fully scalable and possesses three selectable modes allowing it to measure RPM/linear speed/rate, elapsed time and process time. Each panel meter accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Highly accurate (± 0.008% ± 1 digit) Large 6 digit LED display plus two smaller 6 digit secondary displays Wide range input voltage (85 - 264VAC, 50/60Hz) 1/8 din cutout: Panel cutout allows easy mounting
	DT-5TS The DT-5TS panel mount tachometer is extremely versatile. Fully scalable and able to measure and display RPM, linear speed/rate, elapsed time and process time; it accepts signals from a variety of sensors, such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Highly accurate (± 0.008% ± 1 digit) Large 6 digit LED display plus two smaller 6 digit secondary displays Wide range input voltage (85 - 264VAC, 50/60Hz) IP66 front panel protection (front panel water resistant) 1/8 din cutout mounting

Panel Mount Counters
	DT-601CG The DT-6CG counter is fully programmable, bi-directional and features an automatic multiplier, allowing the unit to count up or down. This model can be used as a ”batch” counter/controller to count and display groups of articles such as cartons, cans, bottles etc. The DT-6CG also accepts various modules to perform different functions, such as communicating with a PC or preset “set points” during the counting process. High counting range (-1,999,999 to +1,999,999) Connects ppv to linear units Covers a variety of high speed counting applications Memory backup through a ten year EEPROM

Panel Mount Counters

DT-601CG

The DT-6CG counter is fully programmable, bi-directional and features an automatic multiplier, allowing the unit to count up or down. This model can be used as a ”batch” counter/controller to count and display groups of articles such as cartons, cans, bottles etc. The DT-6CG also accepts various modules to perform different functions, such as communicating with a PC or preset “set points” during the counting process.

High counting range (-1,999,999 to +1,999,999)
Connects ppv to linear units
Covers a variety of high speed counting applications
Memory backup through a ten year EEPROM

Proximity Sensors
	DJ2-G Economical solution for detecting metal in front of a sensing surface; metal objects adjacent to or behind will not normally be detected. Features a pre-wired 17 foot cable assembly, zero-sensing capability and small package size. Can be used with a single projection head or a 10DP gear.	BI2-S12 3 wire DC inductive proximity sensor. Features include short circuit, overload protection and output LED. Meets NEMA ratings 1, 3, 4, 6, 13, and IEC IP67.
	SE-G A solid state 3 wire proximity (switching) sensor specially designed for gear sensing. Provides a square wave output signal and indicates detection via LED indicator (gear pitch must be between 16.93 and 25.4).	MCS-3109 Complimentary (NPN-NO and NPN-NC) proximity sensor normally used in high-vibration areas and where a greater sensing distance is required.
Magnetic Pick-Up Sensors
	MP-10 General-purpose economy model. Designed to mount in a 5/8”-18 threaded hole with included securing jam nut. 10 foot cable included.	3030AN Magnetic pick-up with Amphenol connector; requires sensor cable assembly. This general-purpose unit is designed to mount in a 5/8”-18 threaded hole and is provided with a jam nut for sensor securing.
	3070-XP12010 Specifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. Low impedance allows for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. Explosion proof for gas, vapor, and liquid.
Photo Reflective Sensors
	LS-S50MLP & LS-S50MLR-DT311 Laser Sensor-Color Contrast LS-S50ML is a laser sensor that can be taught to recognize difference in colors. It is a class 1 red laser with switching frequency of 1.5KHZ. Contained in a metal housing with 6ft of cable, which can be utilized for different operations including stroboscopes, counters and panel tachometers. It includes a trimmer potentiometer that is located on the side for minimum and optimum sensitivity adjustments. Can be used in normally closed or normally open operation, NPN type of output, with a yellow LED for signal indication and a green LED for power.
	MCS-625 Consists of a LED infra-red light source sensing device and amplifier contained in a heavy-duty housing. For initial alignment purposes, a small indicator lamp is mounted in the top of the sensor housing. The MCS-625 has an open collector output and requires a pull up resistor.
	MCS-655 Incorporates a complimentary switching voltage output (light/dark activated) that operates up to 333Hz. An LED is mounted in the back of the unit with sensitivity adjustment.
Rotary Pulse Generators
	RE1B-60C 60 digital output pulses per shaft revolution. Maximum speed: 5000 RPM. RE1B-600C 600 digital output pulses per shaft revolution. Maximum speed: 3000 RPM. RE1B-1000C 1000 digital output pulses per shaft revolution. Maximum speed: 1800 RPM. RE2B-30C, RE2B-60C, RE2B-600C Dual (90° out of phase) digital pulses for quadrature applications. Also a zero position (third output) is available to mark the reference position of the shaft. Maximum speed: 3000 RPM and 5000 RPM respectively.

S.A. Meier Company of Milwaukee, Inc.

Quality Sales and Service Since 1932