S.A. Meier
Lloyd™
Material Testing Machines- Single Column Bench Mounted
ls1

LS1 1kN (225 lbf)

  • Uses high accuracy interchangeable YLC Series load cells (< 0.5% of reading)
  • Large working area - 180 mm throat for large specimens
  • Crosshead travel 500 mm (19.7 in) standard, 800 mm extended (31.5 in)
  • Speed range 0.01-2032 mm/min (0.0004-80 in/min)
  • Flexible work surface configurations (Base table (supplied as standard) and optional expanded work table, T-slot table and drip tray)
  • Data sampling rate 8 kHz
LS2.5

LS2.5

  • Uses high accuracy interchangeable YLC load cells (±0.5% from 1% to 100% of load cell value)
  • Crosshead travel 1400 mm (55 in)
  • Speed range 0.01 - 2032 mm/min (0.0004 to 80 in/min)
  • Data sampling rate 8 kHz
  • Saves up to 600 test results
  • 10 programable test set-ups
  • High-resolution backlit LCD display with intuitive operator interface
  • Flash memory upgradeable
ls5 LS5 5 kN (1124 lbf)
  • Simple to set up, operate and maintain
  • Load measuring system exceeds the requirements of all recognized international standards
  • Uses high-accuracy interchangeable YLC load cells (±0.5% from 1% to 100% of load cell value)
  • Crosshead travel 800 mm (31.5 in)
  • Extended version available with travel up to 1400 mm (55 in)
  • Speed range 0.01 - 1016 mm/min (0.0004 to 40 in/min)
  • Data sampling rate 8 kHz
  • Saves up to 600 test results
  • 10 programable test set-ups
  • High-resolution backlit LCD display with intuitive operator interface
  • Flash memory upgradeable
Material Testing Machines - Twin Column Bench Mounted
LR 5Kplus LR5KPlus 5 kN (1124 lbf)
  • Crosshead travel 975 mm (38.4 in)
  • Extended versions available with travel up to 1463 mm (57.6 in)
  • Speed range 0.01 - 1016 mm/min (0.0004 to 40 in/min)
  • Data sampling rate 8 kHz
  • Can be mounted above floor standing compression cage for large sample/complete assembly testing
LR10k LR10KPlus 10 kN (2248 lbf)
  • Crosshead travel 950 mm (37.4 in)
  • Extended versions available with travel up to 1435 mm (56.5 in)
  • Speed range 0.01 - 508 mm/min (0.0004 to 20 in/min)
  • Data sampling rate 8 kHz
  • Can be mounted above floor standing compression cage for large sample/complete assembly testing
EZ20 EZ20 20 kN (4496 lbf)
  • Crosshead travel 870 mm (34.3 in)
  • Speed range
    • Up to 20 kN: 0.001 - 508 mm/min (0.00004 to 20 in/min)
    • Up to 10 kN: 0.01 - 1016 mm/min (0.0004 to 40 in/min)
  • Data sampling rate 8 kHz
  • Can be mounted above floor standing compression cage for large sample/complete assembly testing
LR30K plus LR30KPlus 30 kN (6744 lbf)
  • Crosshead travel 870 mm (34.3 in)
  • Extended versions available with travel up to 1370 mm (54 in)
  • Speed range 0.001 - 508 mm/min (0.00004 to 20 in/min)
  • Data sampling rate 8 kHz
  • Can be mounted above floor standing compression cage for large sample/complete assembly testing
LR50k plus LR50KPlus 50 kN (11241 lbf)
  • Crosshead travel 855 mm (33.7 in)
  • Extended versions available with travel up to 1355 mm (53.4 in)
  • Speed range 0.001 - 508 mm/min (0.00004 to 20 in/min)
  • Data sampling rate 8 kHz
  • Can be mounted above floor standing compression cage for large sample/complete assembly testing
EZ50 EZ50 50 kN (11241 lbf)
  • Crosshead travel 855 mm (33.7 in)
  • Speed range 0.01 - 254 mm/min (0.0004 to 10 in/min)
  • Data sampling rate 8 kHz
  • Can be mounted above floor standing compression cage for large sample/complete assembly testing
Material Testing Machines - Twin Column Floor Standing
LS100 LS100Plus 100 kN (22481 lbf)
  • Crosshead travel 824 mm (32.4 in)
  • Speed range
    • Up to 50 kN; 0.001 - 254 mm/min (0.00004 to 10 in/min)
    • 50 kN to 100 kN: 0.001 - 101.6 mm/min (0.00004 to 4 in/min)
  • Data sampling rate 8 kHz
  • Working width between the columns 404 mm (16 in)
  • Bench mounted model
LR100 LR100KPlus 100kN (22481 lbf)
  • Crosshead travel 1150 mm (45.3)
  • Speed range 0.001 - 508 mm/min (0.00004 to 20 in/min)
  • Data sampling rate 8 kHz
  • Working width between the columns 620 mm (24.4 in)
  • Floor standing model
LR150K LR150KPlus 150 kN (33722 lbf)
  • Crosshead travel 1150 mm (45.3 in)
  • Speed range 0.001 - 254 mm/min (0.00004 to 10 in/min)
  • Data sampling rate 8 kHz
  • Working width between the columns 620 mm (24.4)
  • Floor standing model
Materials Testing Software
Nexygenplus

NEXYGENPlus multi-lingual materials testing software is the hub of the Lloyd Instruments Plus Series materials testing system . This extraordinarily easy to use and flexible software, allows the operator to control and monitor all aspects of the system from a single front end, ensuring fast, reliable and powerful testing and data analysis for tensile, compression, peeling, tearing, creep, relaxation and  flexural test applications.

With NEXYGENPlus software, the user can simply select from the extensive library of pre-defined test set-ups based on international standards to set up routine tests or create an advanced multi-stage test, all using the same program. Still picture and video capture are also included in the software as well as a powerful security and audit trail module to provide 100% traceability, full automation capability for automatic testing and much more.

NexygenMT
NEXYGEN™ MT Materials Test and Data Analysis Software and
Ondio™ Application Builder Software

NEXYGEN™ MT material test and data analysis software and Ondio application bulider software packages can be used with all Lloyd Instruments LR Series materials testing machines. 

For all current Plus Series materials testing machines, see details for NEXYGENPlus software above.

Availible for Legacy Products. Contact us for more information!

Texture Analyser
TA1 TA1Texture Analyser- The TA1 Texture Analyzer is an easy-to-use, cost-effective solution to evaluate the textural properties (compression, shear, extrusion, puncture, hardness forces etc) of a wide range of products at all stages of manufacture. It can perform rapid, detailed texture profile analysis (TPA) for applications up to 102 kgf (1 kN, 225 lbf).
Davenport Polymer Testing Products
Melt Flow

The Davenport Melt Flow Indexer is used to determine the melt flow properties of a polymer by extruding it in a molten state, through a calibrated die using a reference weight. It is used extensively in production and quality control to ensure batch-to-batch consistency and is renowned for accuracy, repeatability, and reproducibility of results.  Two models are available, the manual MFI-9 and the automatic MFI-10.

PET plus

The Davenport PETPlus is a unique test instrument designed for fast and safe solvent-free intrinsic viscosity (IV) measurement of moisture-sensitive polyethylene terephthalate (PET). The instrument can be operated in stand alone mode to provide on screen results or used with our powerful data analysis software package NEXYGENPlus PET.  Existing solvent methods for determining IV involve the need to handle and dispose of toxic solvents.  This preferred method is both kinder to the environment and saves on the high costs of purchase and disposal of solvents.

Density gradient

Davenport density measuring columns are designed to measure the density of solid materials, notably plastics, according to BS2782 Part 6 Method 620D, ASTM D1505-68, ISO 1183 and others. It is also a quick comparative test, ideal for discerning density differences between similar materials.

ft1

For use in the packaging and printing industries, the Lloyd Instruments FT1coefficient of friction tester accurately measures static and kinetic coefficient of friction.  These values are of importance in a wide range of industries including blown film, plastic sheet, paper and coating manufacture. 

The FT1 is a bench mounted, single lead screw dedicated friction tester. A friction table is mounted directly on the machine, with a full
set of accessories included to perform tests conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549.

When using NEXYGENPlus material test and data analysis software, the FT1 may also be configured as a universal material tester to perform tensile, compression, flexural and other mechanical tests.

Coefficient of Friction Testers
Coefficient of Friction Tester (for accurate measurement of static and kinetic coefficient of friction) -The Lloyd Instruments FT1 coefficient of friction tester accurately measures static and kinetic coefficient of friction.  These values are of importance in a wide range of industries including blown film, plastic sheet, paper, packaging and coating manufacture. 

The FT1 is a stand alone friction tester conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549.  The tester is supplied with these three standards pre-programmed, with a total of ten set-ups available for custom configuration. 

 

ls1 LS1 1kN (225 lbf)
  • Uses high accuracy interchangeable XLC Series load cells (< 0.5% of reading)
  • Large working area - 180 mm throat for large specimens
  • Crosshead travel 500 mm (19.7 in) standard, 800 mm extended (31.5 in)
  • Speed range 0.01-2032 mm/min (0.0004-80 in/min)
  • Flexible work surface configurations (Base table (supplied as standard) and optional expanded work table, T-slot table and drip tray)
  • Data sampling rate 8 kHz

 

S.A. Meier Company of Milwaukee, Inc.

 

 

 

 

Quality Sales and Service Since 1932